ACCESS CONTROL SYSTEMS
MT900RC GSM UZAKTAN KUMANDA-PRO
MT900-RC, GSM şebekesinin “Caller-ID” özelliğini kullanarak, bariyer, kayar kapı ve yol bloklarının açılıp kapanmasını sağlayan bir cihazdır. Cihaza kayıt edilmiş olan telefonlardan bir arama geldiğinde rölesini çekerek elektrikli kapıları açar veya kapatır. Bu işlem herhangi bir ücret ödemeksizin gerçekleşir.
FPR140 PARMAKİZİ OKUYUCU TERMİNAL
FPR 140 parmak izi ve proximity okuyucuyu bir arada kullanıma sunan yeni bir çözümdür. Tek başına kullanılabileceği gibi PC bağlantılı olarak da hizmet verebilir. Parmakizi+tuş, sadece parmakizi, kart+parmakizi seçenekleri ile çalıştırılabilir. Sağlam ABS kutusu ile son derece kolay monte edilir. FPR140 en gelişmiş kapasitif okuma teknolojisine sahiptir. Bu yöntemle güç okunan parmaklar dahi kolaylıkla okunabilir.
FPR110 FINGERPRINT TERMINAL
FPR110 is a battery powered stand alone finger print terminal.
MT35RC CALLERID GSM BASED REMOTE CONTROL UNIT
MT35-RC allows Caller ID control of doors, shutters, barriers and road blocks. Controlling (open and close) of electric gates and barriers is realized by a GSM call.
Remote controlled gates with a free phone call that the system does not answer. Once the Caller ID has been matched the relay pulses. If the Caller ID is not known then the call is simply ignored.
Inputs to signal alerts allow inputs to be connected to it to generate text messages to an administrator’s mobile phone. Alerts could be forced gates, blocked infrared beams or even connection to an intruder alarm system output.
Users can be defined by an SMS from an authorized GSM number.
BPR520 PROXIMITY READER TIME ATTENDANCE TERMINAL
BPR520 is a standalone time attendance terminal with a proximity raeder. It is connected to a PC via RS232 or Ethernet port.
BCU501 CONTROL UNIT
BCU501 can control two pieces of wiegand proximity readers. It can work standalone with a RTC (Real Time Clock) also it is equipped with a 32Kb memory (which can be extended up to 128Kb).
BPR201 PROXIMITY READER
BPR201 is a powerful proximity reader featuring small dimensions and a read range of up to 10 cm .The reader will run from any voltage from 9 to 15 VDC and making it particularly suited to access control, car parking and through-wall reading applications. BPR201S is a stand alone model and 600 users can be defined.
BPR201W has Wiegand outputs. BPR201R has RS232 ports. BPR201A has ABA format outputs.
BPR201W is used with our BCU501 control units for online applications as shown below.
BPR1201R is connected to a PC via RS232 interface. BPR201 is compatible with all standard access control systems and is suitable for access control systems, auto-parks, time attendance, secure access, payment systems etc.
It is manufactured as EM Marin data format and it is possible to design them for other data formats.